Product Description
Product Description
NBR high pressure hose
Size: 4"-12"
Working pressure: 10-20 bar
Working Temperature:-20 C deg to +80 C deg (-58 F deg to +176 F deg)
Application: Agricultural Irrigation
Inner tube and cover: PVC-Nitrile Rubber
Reinforcement: High strength polyester filament
Standard Length: any length as your request
Application: Fire fighting, Mining, Water transmission
Temperature:-20 to 80 degree C
NBR LAYFLAT HOSE | |||||||
Part No. | size | Inner Diameter | Wall Thickness | Working Pressure | Burst Pressure | Length | Weight |
mm | mm | mpa/bar | bar | m/roll | kg/m | ||
HJSN20 | 3/4″ | 20.0+1.6 | 2.2 | 10/100 | 300 | 15-60 | 0.21 |
HJSN25 | 1″ | 25.4+1.6 | 2.2 | 10/100 | 300 | 0.28 | |
HJSN38 | 1 1/2″ | 38.0+1.6 | 2.2 | 5.5/55 | 130 | 0.36 | |
HJSN50 | 2″ | 51.0+2.0 | 2.2 | 4.5/45 | 130 | 0.45 | |
HJSN65 | 2 1/2″ | 65.0+2.0 | 2.2 | 3.0/30 | 90 | 0.6 | |
HJSN76 | 3″ | 76.0+2.0 | 2.2 | 2.5/25 | 80 | 0.76 | |
HJSN102 | 4″ | 102 +2.5 | 2.5 | 2/20 | 60 | 1 | |
HJSN127 | 5″ | 127.0+3.0 | 2.8 | 1.7/17 | 60 | 1.25 | |
HJSN150 | 6″ | 150 +3.0 | 3 | 1.5/15 | 50 | 1.5 | |
HJSN204 | 8″ | 204 +4.0 | 3.3 | 1.3/13 | 40 | 2 |
Construction:
The hose is made from extruded thermoplastic polyester.The reinforcement is made from circular woven filament polyester yarn based on PVC-NBR material.
The “extrusion through-the-weave” production method gives a very strong bonding between cover and lining as well as firmly encapsulating the woven polyester.
Feature:
UV resistance,lighter and less bulky than most rubber discharge hose.
Resist abrasion and weathering,Resi kinking and stretching while in service.
More economic solutions replace NBR layflat hose and TPU layflat hose in some cases.
Application:
Suitable for use and recommended for industrial and agriculture application in : Dewatering and operations, Frac water transfer,Distribution of slurry and manure as fertilizer.Fuel,oil and chemical transfer.
FAQ:
1. Are you factory or trading company?
We are a professional manufacturer with factory located in shijiazhuang City, hebei Province.
2. Can you do the design for us?
Yes, We supply full OEM and ODM service for our customers.
Please tell us your ideas and we will help to carry out it into perfect products.
3. When can I get the quotation?
Within 24 hours after we get your inquiry, you can also call us or email to us.
So we will regard your inquiry priority.
4. Could I get a sample for checking quality?
Of course, we supply free samples for you to check the quality,
and you need to pay charge for the sample cost(DHL/FEDEX/EMS).
5. What’s your payment term?
Usually 30% as deposit, 70% before shipment by T/T.
On Alibaba, Paypal, Western Union, T/T are also ok.
6. What about the lead time for mass production?
The lead time of MOQ is about 10 to 15 days.
Honestly, it also depends on the order quantity and the season you place the order.
7. What is the shipping port?
Qingdao port. Our factory takes 2 to 3 hours from Qingdao Port
8. Whers is the location of your company?
HongJiang Plastic is located in SHIJIAZHUAGN City, HEBEI Province,China.
If you would like to have a visit, you are much welcome.